The hole glides on my RX 20 (full slot vacuum) are worn down pretty good. I just switched over to 02 jets, 5 for a 10 flow so I am getting a good flush. I use the RX on commercial carpet only and get good dry times with the hole glides. I am thinking of trying slots or hybrid for my next set of glides to get better agitation and pick up more embedded sand and crud. What would you recommend?
RX-20 What type of glide?
- Thread starter kmdineen
- Start date
J
Jester
Guest
I have holes on my wand never tried glides on an RX I'm curios too see what
the replies are.
PM Sent
the replies are.
PM Sent
S
scott schulte
Guest
Stick with the holes, just make sure nobody sees you using them or the ChemWho police might come getch ya!
F
FastEddie
Guest
With rotary jet extraction, I would definately go with slots. You won't believe how much more crap is sucked out of the carpet. Believe me, the proof is in the filter.
J
Jester
Guest
Is there a when going from a hole glide to a slot or a hybrid is there a big difference in dry times or is it not very noticeable. all I have used is holed wand glides.
thanks
thanks
