Aero Tech XT
Supportive Member
Yes I will get a video uploaded tomorrow.
i will also try and get a video of the equipment running as well.
The birth of an Aero Tech XT
- Thread starter Aero Tech XT
- Start date
Yes I will get a video uploaded tomorrow.
i will also try and get a video of the equipment running as well.
Mardie
Member
Are you going to have something to get heavy machines such a the Cimex in and out of that truck .
The whole racking system looks great. I can't wait to see the truck.
Mikey P
Administrator
The line may be a mile long to check the beauty out..
dealtimeman
Everyday is Saturday.
Or just all thirty of the attendees?
I was responsible for selling 2 Aerotechs this week.
The used one that was for sale here by indicating and making up my good friends mind of it.
The owner of that Aerotech put an order for a new one.
The used one that was for sale here by indicating and making up my good friends mind of it.
The owner of that Aerotech put an order for a new one.
AshleyMckendree
Supportive Member
Is the rail system a custom item made my AT? It seems like Draper used something similar.
Mike Draper
Member
- Joined
- Jan 13, 2008
- Messages
- 4,402
. It was their idea. You can get the parts at any electrical store it even lowes. It's call uni-strut. AT makes the corner brackets that tie it together.
Desk Jockey
Member
If you put down 20% and financed it for 60-month your payment would be close to around $1,700.00???
I'd need a few fold down beds in there to afford one....can you get cable hooked up in there for my kids?
Seriously if you do a lot of commercial work that dude should pay for it self easy running duals.
Sweet package and quality build!!!
I'd need a few fold down beds in there to afford one....can you get cable hooked up in there for my kids?
Seriously if you do a lot of commercial work that dude should pay for it self easy running duals.
Sweet package and quality build!!!
dealtimeman
Everyday is Saturday.
With 20% down and 60 months how much do the butlers in a box cost per month?
Desk Jockey
Member
They give them away to VIP's.......and that would NOT be you!
Aero Tech XT
Supportive Member
If you put down 20% and financed it for 60-month your payment would be close to around $1,700.00???
I'd need a few fold down beds in there to afford one....can you get cable hooked up in there for my kids?
Seriously if you do a lot of commercial work that dude should pay for it self easy running duals.
Sweet package and quality build!!!
Doc, you are very close.
14,500 lb chassis + XT basic package
No Money Down
$1,572 per month
3.99%
60/10 TRAC
17.950 lb chassis + XT basic package
No Money Down
$1,630 per month
3.99%
60/10 TRAC
curious about these finance options???
send me a PM or give me a call and i will explain.
Mikey P
Administrator
$1630 a month is what many and mortars will pay per month to sell shoes, ice cream, bicycles etc..
Do those stores bring in 20 or 30k a month?
What are their inventory costs?
Employees?
Even at $1000 a month for a Hydramaster CDS this racket is a bargain..
Do those stores bring in 20 or 30k a month?
What are their inventory costs?
Employees?
Even at $1000 a month for a Hydramaster CDS this racket is a bargain..
Desk Jockey
Member
Is that a 10% residual? Not bad!
Aero Tech XT
Supportive Member
Desk Jockey
Member
I like that deal!
Aero Tech XT
Supportive Member
Here is a go at uploading the showing how the carpet wands work.
http://www.youtube.com/watch?v=hFawCJ6M7Zc&feature=youtu.be
http://www.youtube.com/watch?v=hFawCJ6M7Zc&feature=youtu.be
Last edited by a moderator:
hogjowl
Idiot™
Paint it black and he'll be all over it.
Desk Jockey
Member
Black? All our vehicles are blue.
Ok, so really not a bad deal at all. I pay $642 for the chevy express with the spartan box and $671 per month for Everest 650 hp and equipment. And as much as I like my Everest set up it stil doesn't measure up to the A/T XT, yeah I said it. So my total of $1,313 isn't that much cheaper than their entry level, heck tha's only one desent job a month, so there you have it. I would have gone with the AT if I hadn't had the whole UD fuel pump scare and there was a bigger choice locally of who to have work on the UD.
Sometime during this 3 day holiday I am going to set down and salavate again over this entire thread. Thanks AT for sharing!
Sometime during this 3 day holiday I am going to set down and salavate again over this entire thread. Thanks AT for sharing!
Last edited:
Mikey P
Administrator
1313 ??
Good gravey, did you get a loan from Jimmy Carter hisowndamnself?
Sent from my SCH-I605 using Tapatalk 2
Good gravey, did you get a loan from Jimmy Carter hisowndamnself?
Sent from my SCH-I605 using Tapatalk 2
hogjowl
Idiot™
Yeah, but you never wash them, so they all eventually look black. So, I figured they would be doing you a favor.
hogjowl
Idiot™
Billy hit on the one single thing that concerns me about the AT. Local support ... or the lack thereof. AT is good at 0n-line support, and the issues that come up on V/AT rigs are very few and not hard to fix. Even the blown pto on my V was easy to find someone locally to fix. What concerns me is the fact that there are no local dealers of the truck itself in my market. Who warranties the truck? Do I have to have it towed to Birmingham for service? Having said that, if I had to make the choice today, the AT is first on my list.
Mardie
Member
The truck manufacturer can usually set you with a local certified shop to do warranty work. Only problem is that due to parts you may have to wait an extra day for service. I have seen this done before.
Mardie
Member
How many TG spinners can this truck run at the same time.
And the unanswered question. Are you going to have a way to get heavy machines such as a Cimex in and out of this truck.
And the unanswered question. Are you going to have a way to get heavy machines such as a Cimex in and out of this truck.
Last edited:
Foothills Phil
Member
Mike is right, I sold shoes for the largest chain and they share their profit and loss details with the staff. After salaries depreciation merchandise etc they made about 25k per store! You big guys could definitely justify the machine with the depreciation cutting your income tax.
hogjowl
Idiot™
I had a Vortex for a couple of years and from my experience your concerns are no concern. If you can lift it up into a standard van, you should be capable of lifting it up another 18 inches into the AT. If you are a puss, and need a ramp, then the AT is better suited for that because you have room to STORE the ramp.
Desk Jockey
Member
So which side of the box did you store your ramp on? Drivers or passengers side?
Desk Jockey
Member
So which side of the box did you store your ramp on? Drivers or passengers side?
