Titanium wand jets,

[steamron]

I have a Prochem titanium wand, wondering if anyone one changed up the jets to fit their needs or preference. What are they?

I don't like the slight over spray one each end.

 

[Dwain Ray]

I have a Prochem titanium wand, wondering if anyone one changed up the jets to fit their needs or preference. What are they?

I don't like the slight over spray one each end.

On most of my wands i found if you slighty angle the jets you can eliminate overspray and streaking (in the middle where 2 jets spray patterns hit one another)

 

[BIG WOOD]

I think 80 degree jets are good if you don’t have jet extenders. What’s the current angle on the outside jets?

 

[Kenny Hayes]

Even the old Jimmy Bane wand would do that at 150 psi

 

[SuperiorF]

I have a five jet wand. I purchased it used it came with five 80015's. Does this sound right? Any suggestions? I believe it may be a prochem>

 

[Mikey P]

8001- 9501-11001-11001-9501-8001 for six flow and no extenders

 

[BIG WOOD]

I have a five jet wand. I purchased it used it came with five 80015's. Does this sound right? Any suggestions? I believe it may be a prochem>

The only wand I know of that’s a 5 jet is a pmf mach15

 

[BIG WOOD]

80015= 80degree spray and 1.5flow x 5= 7.5flow of water