Jimbo
Member
- Joined
- Oct 7, 2006
- Messages
- 2,197
to make sure it still works! It does...sure is quiet though!
I just called my Lake Tahoe office phone number...
- Thread starter Jimbo
- Start date
bob vawter
Grassy Knoller
Jimbo...they got Viadocs out yor way......
better pic one out.....!
I actually think i see a cobweb on MY phone!
better pic one out.....!
I actually think i see a cobweb on MY phone!
Jimbo
Member
- Joined
- Oct 7, 2006
- Messages
- 2,197
I have been getting some work time in on the hotrods...so that's good. New exhaust gasket for the 67 Camaro Vert...prepping the Challenger for a big block transplant...finishing new interior on the 67 ElCamino.
Might have a buyer for the Vert...so we can spend some money on the Challenger...we'll see.
What hotrods are you guys working on??
Might have a buyer for the Vert...so we can spend some money on the Challenger...we'll see.
What hotrods are you guys working on??
packfancjh
Member
I'm working on a big hotrod that is getting an entirely new kitchen and fireplace right now.
bob vawter
Grassy Knoller
VIADOCKS......!!!!
remember Scarface when all the people was sleepin' unnerneath....the viadocs?
I been on the hotrods too...i put a BRAND NEW OEM dash and instrument bezel on the Dually...
which promtly thanked me by eating a camshaft!
Summit is sending me a new one...as it is only FOUR MONTHS OLD....
QUESTION:
What would cause the two REAR lobes to wipe off......
THREE TIMES NOW!!!!!
remember Scarface when all the people was sleepin' unnerneath....the viadocs?
I been on the hotrods too...i put a BRAND NEW OEM dash and instrument bezel on the Dually...
which promtly thanked me by eating a camshaft!
Summit is sending me a new one...as it is only FOUR MONTHS OLD....
QUESTION:
What would cause the two REAR lobes to wipe off......
THREE TIMES NOW!!!!!
Blue Monarch
Supportive Member
Scary slow here right now too. If this keeps up, I'm up a creek.
bob vawter
Grassy Knoller
It's a good thing that i gots my retirement check each month to keep me going...
yous all ARE gonna keep workin'......RIGHT?
yous all ARE gonna keep workin'......RIGHT?
KevinD
Member
No problem here wondering if the phone is working.
The telephone solicitors let me know several times a day.
The telephone solicitors let me know several times a day.
Bruce Humphrey
Member
Bob save me a spot on that wet mattress
bob vawter
Grassy Knoller
OK...maybe Viadocs IS a little overeacting.....
but i DO see tent and cardboard cities wit the National Guard passing out food an' bottle water......an' YES at some point, yor mattress MAY get a LITTLE wet!
anyone wanna bet a Fi......?
nevermind...they won be WORTH fi..........!
did i mention the riots.....?
but i DO see tent and cardboard cities wit the National Guard passing out food an' bottle water......an' YES at some point, yor mattress MAY get a LITTLE wet!
anyone wanna bet a Fi......?
nevermind...they won be WORTH fi..........!
did i mention the riots.....?
bob vawter
Grassy Knoller
"Rome is gonna fall, ladies!"
Chuckee
is that secret code talk.....?
and was that......
Tiananmen Square......
and WHAT did that soldier DO when he realized that you were next to him...?
you AIN'T suppose to be stannin' there!!!!!
Now that you got THAT FAR....can you find the EXACT SPOT where that guy stood against the tanks...and get a picture of YOU there!
PRICELESS!!!!
however i get this picture of Chuckee in a Chinese Prison Camp wit the head guard hasin' his way wit Chuck...ever nite!
Chuckee
is that secret code talk.....?
and was that......
Tiananmen Square......
and WHAT did that soldier DO when he realized that you were next to him...?
you AIN'T suppose to be stannin' there!!!!!
Now that you got THAT FAR....can you find the EXACT SPOT where that guy stood against the tanks...and get a picture of YOU there!
PRICELESS!!!!
however i get this picture of Chuckee in a Chinese Prison Camp wit the head guard hasin' his way wit Chuck...ever nite!
packfancjh
Member
Jim are you out riding at Mt Rose today?
Jimbo
Member
- Joined
- Oct 7, 2006
- Messages
- 2,197
Don't believe the snow report Terry...Actually Chris no...I'm messing around with cars...Actually have some jobs for the next few days.
Bob :http://en.wikipedia.org/wiki/Viaduct
Bob :http://en.wikipedia.org/wiki/Viaduct
bob vawter
Grassy Knoller
ya but Steven...down south they's still sleepin' wit their sisters ta stay warm.......
Becker
Member
i know mine works, Telemarkers are calling like crazy.
Work is slow, but not dead.
Work is slow, but not dead.
I have had one of my better months this year and I dont know what I'm doing I'm know where near making tons of money but I'm staying busy.
Jimbo I have got a new project but havent started on it yet got rid of the 70 nova and now got a 57 Willys Wagon all torn apart right now.
Bob break in the motor and the cam in the right way next time at least 20 min of 3500 rpm so be sure there is no leaks when you go to fire it up the first time its all about oiling and the break in period that makes cams go flat especially on Big blocks.
Jimbo I have got a new project but havent started on it yet got rid of the 70 nova and now got a 57 Willys Wagon all torn apart right now.
Bob break in the motor and the cam in the right way next time at least 20 min of 3500 rpm so be sure there is no leaks when you go to fire it up the first time its all about oiling and the break in period that makes cams go flat especially on Big blocks.
Its winter there's 2 flippin feet of snow on the ground, and were in the worst economic times since the great depression (they say), ya,
no shit it's slow,
whaddya expect?
Go skiing and relax, if you didn't plan for it, it's too late to do anything 'bout it now...
hit the trails!
no shit it's slow,
whaddya expect?
Go skiing and relax, if you didn't plan for it, it's too late to do anything 'bout it now...
hit the trails!
bob vawter
Grassy Knoller
Yes Chad....i've broken in a hunnert big block motors.....that way.......
this motor is eating them..in about four months! always the last two lobes!
A crane and TWO comp cams so far!
Comp Cams wit Hi-tec push rods and Comp-Cams 1320-16 hi dollar rollor rockers..single spring wit a damper!
i even buy the little bottle of zinc crap that they try ta sell ya!
this motor is eating them..in about four months! always the last two lobes!
A crane and TWO comp cams so far!
Comp Cams wit Hi-tec push rods and Comp-Cams 1320-16 hi dollar rollor rockers..single spring wit a damper!
i even buy the little bottle of zinc crap that they try ta sell ya!
Bob Foster
Member
- Joined
- Oct 8, 2006
- Messages
- 8,870
.
truckmount girl
1800greenglides
bob vawter said:
My guess is you've got a problem with the lubrication system. Aint no oil gettin to the cam on that end for some reason...now figure out why.
Take care,
Lisa
bob vawter
Grassy Knoller
truckmount girl said:
My guess is you've got a problem with the lubrication system. Aint no oil gettin to the cam on that end for some reason...now figure out why.
Take care,
Lisa[/quote:17jpzib0]
Leaves it to a woman to say the obvious..
my mechanic calls it a "block shift"...
whatever it is...i'm so screwed
There WAS some talk in the shop tonite of putting the BIG motor in.....it!
Shouldn't YOU be packin'???
truckmount girl
1800greenglides
Is it an old motor or a new motor?
Take care,
Lisa
Take care,
Lisa
