Please welcome PMF, the very latest MB advertiser!
- Thread starter Mikey P
- Start date
Mikey P
Administrator
and make sure to pre register for M10 to meet Curt from PMF in person.
As of right now we only have 24 spots left. The VFW Hall only fits 600 people so sign up NOW!~
As of right now we only have 24 spots left. The VFW Hall only fits 600 people so sign up NOW!~
dealtimeman
Everyday is Saturday.
Steve Lawrence
Member
Welcome PMF. Love your furniture tools.
ruff
Member
Welcome PMF.
Been using and owning many of your tools for many years and mostly quite happy with them.
Two issues though with your internal jet upholstery tool, which I've promoted here for a long time:
Been using and owning many of your tools for many years and mostly quite happy with them.
Two issues though with your internal jet upholstery tool, which I've promoted here for a long time:
- It has a very bad valve. Why not create a good dependable valve that does not leak so quickly.
- On the 4" version (inner jet upholstery tool) the jet coverage does not quite cover the 4" opening.
Mikey P
Administrator
the V800 is a nice valve...I wonder if it could be used
Desk Jockey
Member
I predicted it, if you have it they will come! Can't wait!
Desk Jockey
Member
The 800V is a nice brass valve but most of the upholstery tools come with the aluminum cheapies that don't hold up to heat or pressure.
I think you can special order them with the 800v but I don't believe it fits on all tools to upgrade on your own. Unless you are going to order the larger hanger and reducer for the plumbing.
I think you can special order them with the 800v but I don't believe it fits on all tools to upgrade on your own. Unless you are going to order the larger hanger and reducer for the plumbing.
curt@pmftools.com
Member
Hey Ofer,Let me know which valve you have as far as the material it's made from,I'm sure I we can improve on this problem.We have a lot of different option's on the gut's in that valve for different app's.Call me anytime at 800-992-9263.We'll get that spray pattern dialed in also.Thanks for the welcome gang,Mike has a bitchin board here and is alway's looking for the cutting edge in tools,which is confusing because he ride's a steel bicycle rather then the cutting edge bike's made from carbon fiber like I ride?? Maybe steel is a good excuse for going SLOW
curt@pmftools.com
Member
Hey Doc,the internal spray upholstery tools can be outfitted with plastic/alum/brass or stainless valves all made by us here in the good ole Oregon USA,the customer just has to request which setup they want.
curt@pmftools.com
Member
Nope,to big to mount on the internal upholstery tool's Mike,the V1245 stainless 1000psi would be my choice for T.M. durability.
Desk Jockey
Member
Stainless would be nice.
Why do you suppose most distributors only sell your products with the cheap valves? They think we're stoopid don't they?
Cheap never lasts, your products would be better served with some of your better valves.
Why do you suppose most distributors only sell your products with the cheap valves? They think we're stoopid don't they?
Cheap never lasts, your products would be better served with some of your better valves.
curt@pmftools.com
Member
Hey Doc,hope not,without you,there is no us.We have the cheap valve's for the L.P. no heat app's & the brass/stainless valve's for the H.P.high heat guy's.You can always call me before buying any tool or valve at 800-992-9263 to keep everything safe,that's my number one concern because of the power we have now day's.
Desk Jockey
Member
I do like the 800V but the aluminum valves couldn't take the heat even with low pressures & they corroded so fast I'd have a few on hand to replace them once the spring broke in them. Tried the repair route but found it more cost effective just to toss the valve and replace them. The 800V wasn't ever a problem for me.
Steve & Ofer should be your poster boys, they love your upholstery tools.
Cheap basturds!
I've bought a lot of PMF over the years, good value for the price. I used to love the plastic head tool with the plastic yellow jet. It was light weight but did a great job for someone that doesn't clean a lot of upholstery.
Steve & Ofer should be your poster boys, they love your upholstery tools.
Cheap basturds!
I've bought a lot of PMF over the years, good value for the price. I used to love the plastic head tool with the plastic yellow jet. It was light weight but did a great job for someone that doesn't clean a lot of upholstery.
Total_Rookie
Member
Welcome PMF. A lot of ideas and feedback being produced from this board. As a matter a fact I have an idea for a wand. If your interested call or pm me.
curt@pmftools.com
Member
Hey Joe,thanks.You draw it & we'll more then likely be able to build it.But if you want it to be your's for resale by you,you need to protect your idea.
ruff
Member
It is just a very good tool.Steve & Ofer should be your poster boys, they love your upholstery tools.
Cheap basturds!
I also have their 6" stair tools and use their drapery tools (very finely finished tools) when trying to avoid leaving marks on delicate fabric and a few of their inner jet without the hide a hose (as a back up.)
Yea, you can say that I've supported them well through the years
.Nice to hear from you Curt, I'll call when things slow down, or just see you at MF.
I appreciate the response.
And don't forget Art's endorsement of the tool, Richard. Art, who According to Saddam Hussein, is the Mother of all upholstery cleaners
Last edited:
Desk Jockey
Member
Yes we have a couple of their drapery tools also.
Mikey P
Administrator
lol...he rides a POS DRZ400 galvy framed turd and has the nerve to pick on me..
