John LaBarbera
Member
What can I say, Jim. Maybe they were too small to do the job. I can asure that this is not the case with this motor. High Speed burnishers take a bit of load and the best ones out there use PM motors. But to each there own.
New Mytee Rotary Extractor
- Thread starter Mikey P
- Start date
What can I say, Jim. Maybe they were too small to do the job. I can asure that this is not the case with this motor. High Speed burnishers take a bit of load and the best ones out there use PM motors. But to each there own.
joeynbgky
Supportive Member
I would seroiusly consider this....I am so glad to hear mytee has been testing it along time before sending to market.. I have a 360I on one truck but would like to have this on the new one. John.....is belinda coming back? She's missed. Send me a new machine to test for a week. And if I like it ill buy it.. deal??? 
Sent from my T-Mobile G2 using Tapatalk 2
Sent from my T-Mobile G2 using Tapatalk 2
John LaBarbera
Member
I would seroiusly consider this....I am so glad to hear mytee has been testing it along time before sending to market.. I have a 360I on one truck but would like to have this on the new one. John.....is belinda coming back? She's missed. Send me a new machine to test for a week. And if I like it ill buy it.. deal???
Sent from my T-Mobile G2 using Tapatalk 2
We miss Belinda too. Her mother was very ill and she had to quit to take care of her. Belinda is a great gal. I don't know when and if she is coming back. We keep hoping.
dealtimeman
Everyday is Saturday.
John any videos of the trex operating?
John LaBarbera
Member
Were working on it.
John LaBarbera
Member
Jim Martin
Supportive Member
Most ( not all ) of your High Speed burnishers are belt driven....not really comparing apples to apples IMO.....your taking a machine that is sitting on a ( some what ) slippery surface with a pad...you will get some torque on the start up...but then all it is going to do is free spin with a lot less resistance......... nothing compared to a rotary that is gear driven...with a large truck mount having it sucked down to a carpet surface.....There are start capacitors on those A/C motors for a reason.....
I am not trying to knock your machine.....and I do not clame to be the smartest person here....but I spent years doing things like this and I do know my motors and mechanics of things......time will tell I guess..............
Eric Valentine
Member
The motor on the T-Rex looks to be a bitt larger and more torque than the motor on a RV360/i.
Nate The Great
Member
So does Jon's belly too, since I last seen him... Sorry, I tried helping myself, but couldn't!
John LaBarbera
Member
So does Jon's belly too, since I last seen him... Sorry, I tried helping myself, but couldn't!
Yes, it's a funny thing, the more hair I lose the bigger my belly gets. I've tried getting it to go the other way, but to no avail. And Nat, BTW, it's John not Jon. Wise guy.
To shiny....they tend to spot up....a nice black would be good....
and on burnishers, the start up is off the floor, so no torque....but if you hit uneven surfaces, or get it caught under a shelf....welllll lets just say i have killed a 17hp motor
they can get plenty opf torque...even with belt driven....
welllll shit this may mean i have to come out there now...I was trying to decide
and on burnishers, the start up is off the floor, so no torque....but if you hit uneven surfaces, or get it caught under a shelf....welllll lets just say i have killed a 17hp motor
they can get plenty opf torque...even with belt driven....welllll shit this may mean i have to come out there now...I was trying to decide
hogjowl
Idiot™
I am a bit late to this party, but I am certainly interested in this machine. I hope it really IS a well thought out, fine turned machine.
Desk Jockey
Member
John LaBarbera
Member
Well shucks Petunia Im speechless. Just hog tie me to the side of the barn. Cuz I'm having ribs tonight.
I like the motor on the T-Rex... It's very shiney!!! I like shiney things...
Well George, you'll probably like the pants of most of John's competitors, they're all shiny.
John's though, would be dull, as he always seems to be out doing things, testing,trying to match my hair and belly styles, etc; not getting shiny sitting behind a desk counting beans.
Desk Jockey
Member
Hey! whats wrong with counting beans, someone has to do it!not getting shiny sitting behind a desk counting beans.
hogjowl
Idiot™
Never mind. I just took the time to read Jim Martin's comments.
I'll wait for the revised version to come out after all the hoopla dies down and a few motors burn up.
But, keep me on your Christmas card list.
Desk Jockey
Member
Damn, if anything Piglet you are consistant! 
hogjowl
Idiot™
Well, would YOU buy one now that Jim said the motors are crap?
Desk Jockey
Member
I respect Jim's opinion because he has proven he really knows his sh*t but do you really think Mytee would go to this much expense without some serious RD on the unit?
hogjowl
Idiot™
Of course not, that never happens in this industry.
What was I thinking ...
What was I thinking ...
Desk Jockey
Member
LOL
you baad maanN veery baad maaN!
you baad maanN veery baad maaN!
John LaBarbera
Member
I agree. I think most on the board feel the same way. Jim has proved time and again that his experience and knowledge is expansive. I especially was impressed how he was able to help guys that had trouble with their vortex machines.
Last edited:
FredC
Village Idiot
- Joined
- Jul 13, 2011
- Messages
- 27,131
Mikey P
Administrator
So John
what sort of press is the Trex getting on other boards?
what sort of press is the Trex getting on other boards?
John LaBarbera
Member
I dont know, why dont you go over and look and give us a review? So I take it you didn't use a rotary today, huh?
Mikey P
Administrator
I used the Trex knock off Bristor and I are working on.
It's a million ways better but only cost six bucks.
It's a million ways better but only cost six bucks.
John LaBarbera
Member
So what rotary did you use on your job today? And can you quit pouting. I'll let you use one when I have more inventory.
