realclean
Member
What would cause foot prints on tile after you cleaned it?
FeetWhat would cause foot prints on tile after you cleaned it?
I had a similar situation after using Tsunami. Although I thought I rinsed it well, apparently I needed to rinse some more. Just wet mopped the floor and it solved the problem. I was using a turbo hybrid at 1000 psi for rinsing. Probably went too fast.I'm going to guess either etching or topical coating damage..
I don't think my Chem feed was working. Fixed now.Let me take this opportunity to remind all you idiots, again, to be using and all fiber rinse, pH of 4 to 5, through your trucks when you clean porcelain tiles...
It was ceramic tile and I pretreated brushed the grout then rinsed going in and back out with 1100 psi water.Come on tiger, you're going to have to be way more specific than that..
Let's start with what type of tile and did you walk your pre-spray or rinse off onto it
I don't know what the footprints look like, I cleaned my way out and it did not have any on the floor when I left. The customer called and said their footprints were on the floor.What are the footprints look like and why didn't you take pictures
OhI don't know what the footprints look like, I cleaned my way out and it did not have any on the floor when I left. The customer called and said their footprints were on the floor.