SX7 or Mini Turbo Hybred

[Rob Grady]

What is your preference? Hands on experienced users need only reply.

 

[hogjowl]

I’ll reply if I want to!

 

[Mikey P]

mini spinners have a niche I suppose, I've just never found a situation where this tool does not work better..

Lighter, gets into corners, handles bullnoses like no other, and is more than enough for walls counters and trim work.

PMF 'MB Grinder' Hard Surface Tool - GreenGlides - The Original Carpet Cleaning Glide

The absolute best hard surface tool for counters, walls, staircases, and other hard to reach areas Improved features compared to the lower cost versions include: 1000 PSI valve 2 jets for better coverage 10 ft Hide A Hose No assist handle No vacuum relief 1.5″ vacuum connector included

greenglides.com

 

[Papa John]

I have both for sale barely used.
I'm just too busy cleaning carpets, rugs, and upholstery to offer this service.

 

[todg]

I would suggest the old mini round mini turbo if you can find it...The other handheld tile cleaning tools other than the SX7 have stationary mounts (no spinning)

 

[hogjowl]

I have a brand new never used Mytee spinner you can have that never spinned in the first place.

 

[Mikey P]

I have a brand new never used Mytee spinner you can have that never spinned in the first place.

It probably broke just sitting there..

 

[Rob Grady]

Thanks people!

 

[hogjowl]

Any time

 

[todg]

I have had this tool for over 20 years...they don't make it anymore...If you can find one to buy they're the best!
I made over 250K cleaning showers, counters, backsplashes, and more...

 

[FredC]

you're slipping @Lee Stockwell

 

[Mikey P]

I have had this tool for over 20 years...they don't make it anymore...If you can find one to buy they're the best!
I made over 250K cleaning showers, counters, backsplashes, and more...

Totally unnecessary and messy af

and unable to to reach narrow risers and worthless on bullnoses..

 

[todg]

Totally unnecessary and messy af

and unable to to reach narrow risers and worthless on bullnoses..

All these tools are messy...I have to disagree with you, Mike. I have the other single jet tools and they are no comparison with this mini turbo...Matter of fact, faster and more effective just like the turbo-hybrid...But hell, don't listen to me...

 

[Lee Stockwell]

I never cared for it. I have a zero degree jitter tip on a spray wand that does better

 

[Rob Grady]

I see where the MB Grinder has 2 spray jets.

 

[todg]

I see where the MB Grinder has 2 spray jets.

ya put that on a bullnose and see what happens...Most of the time my mini turbo I use in showers...If you make a mess cleaning counters, it's easily wiped up! go figure...

 

[Mikey P]

ya put that on a bullnose and see what happens...Most of the time my mini turbo I use in showers...If you make a mess cleaning counters, it's easily wiped up! go figure...

Speculation..

Try this with a 7" disc..

 

[Mikey P]

 

[Mikey P]

 

[Mikey P]

 

[Mikey P]

 

[Mikey P]

 

[Mikey P]

I see where the MB Grinder has 2 spray jets.

Only ours has 2 jets

 

[JS41035]

I use mine to clean the floor of my van . Its like a 17 inch turbo hybrid, because you wont ever use it, but it might make other cleaners feel bad about themselves for not having one. ( Saiger) So I recommend it. Or buy the janky upholstery tool looking thing that Mikey hacks stuff out with.

 

[Mikey P]

I use mine to clean the floor of my van . Its like a 17 inch turbo hybrid, because you wont ever use it, but it might make other cleaners feel bad about themselves for not having one. ( Saiger) So I recommend it. Or buy the janky upholstery tool looking thing that Mikey hacks stuff out with.

Isnt there a hood cleaning group you could be bothering?

 

[JS41035]

I come hear for the peace and quiet.

 

[Lee Stockwell]

I come hear for the peace and quiet.

...and because his dad is a typo nazi.

 

[FredC]

and yet this thread's title remains ...

 

[Lee Stockwell]

I don't fix them all

 

[KevinD]

And your son could care less I bet